Tube Alignment System Fills The Gap In China

< p > at present, most of our country's < a href= "//www.sjfzxm.com/news/ > > textile enterprise < /a > through the spinning machine yarn sampling test, < a href=" //www.sjfzxm.com/news/index_c.asp "> spinning frame < /a > machine working condition inspection mode, to determine whether the maintenance management is in place.

Although this method can reflect the production quality of the bobbin to a certain extent, there are many defects such as the random sample and the damaged yarn after test.

Therefore, textile enterprises have been looking forward to have a system that can achieve dynamic management of every spindle quality.

Although the winding machine can conduct a statistical analysis of the quality of each tube yarn, and detect the tube yarn with quality problems, it can not detect which spindle is produced from the defective yarn.

In order to check the state of spindle, textile enterprises often use sticker method and writing method, but these methods are not convenient.

< /p >

< p > the JN-GDDW type pipe alignment system developed by Jiangnan University's textile < a href= "//www.sjfzxm.com/news/index_c.asp" > clothing college < /a > can solve these problems easily because of the dynamic management.

< /p >

< p > the system consists of three parts: information bobbins, detector and special software of the pre installed counterpoint system. Generally, a 50 thousand spindles spinning workshop can be matched with a set of systems to meet the needs of production management.

The information bobbin of the system is determined by the number of spindles of the spinning frame, generally 480, which can meet a single test of < a href= "//www.sjfzxm.com/news/" > spinning frame < /a >.

The detector is mainly composed of detector charging power supply and detector.

The detector consists of a power switch, a dial key function group, and 12 digital keyboards, a control keyboard, an indicator lamp and a charging indicator lamp.

< /p >

< p > the operation of the system is simple. When it is necessary to detect the running situation of the spinning frame, the information bobbin is first installed on the spinning machine to be detected, and the information tube yarn is obtained.

The reader of the system records the position sequence of the information tube yarn installed on the spinning frame, that is, the position of the registration information tube yarn on the spinning frame.

This operation can be completed according to the technological management needs of the enterprise, and can be completed at any time between the bobbin installation and the fine yarn < a href= "//www.sjfzxm.com" > spindle spindle > /a > to doffing.

The automatic winding machine can detect the poor quality of the tube yarn. The system will complete the tracing of the information tube yarn, locate the corresponding spindle of the initial spinning frame, adjust the parameters of the spinning frame, and speed up the detection efficiency of the spinning spindles.

< /p >

< p > the system is currently being used by many companies such as Wuxi cotton, Jiangsu Dasheng, Anhui Huamao, Jiangsu Yueda, Wuxi Xiexin, Nantong double rainbow and so on.

The enterprise generally reacts that the system has many advantages: the non-contact identification technology does not damage the tube yarn and improves the data collection efficiency. The label can be attached to any position of the bobbin without affecting the reading of the label. The bobbin is randomly installed on the spindle position of the spinning machine, and it is convenient to inquire about the relative information of the tube and yarn, and realize the real-time tracing of the yarn information. The information bobbin can be used repeatedly, at any time, the quality requirements of the spinning yarn are adjusted at any time, and the lowest spindle position of the spindle on the spinning frame is checked.

< /p >